COKER BOSS Cleaners - Designed the difficult bleeder valves in Coker Units

MNPT Description Drill Dia. Work Length Model

1/2"Straight Tool3/8" (9mm)12"/ 30cm CKR-3450-L-12"...Options & Parts Kits

1/2"Straight Tool3/8" (9mm)7"/ 17cm CKR-3450-L-7"

1/2"Straight Tool3/8" (9mm)48"/120cmCKR-5250-L-48"...Options & Parts Kits

1/2"Straight Tool3/8" (9mm)36"/ 90cm CKR-5250-L-36"

1/2"Straight Tool3/8" (9mm)24"/ 60cm CKR-5250-L-24"

1/2"Straight Tool3/8" (9mm)18"/ 45cm CKR-5250-L-18"

MNPT Description Drill Dia. Work Length Model

1/2" 90 Deg Angle Tool 3/8" (9.5mm) 24"/60cm CKR-3400-L-24" ... Options

1/2" 90 Deg Angle Tool 3/8" (9.5mm) 18"/45cm CKR-3400-L-18"

1/2" 90 Deg Angle Tool 3/8" (9.5mm) 12"/30cm CKR-3400-L-12"

1/2" 90 Deg Angle Tool 3/8" (9.5mm) 7"/17cm CKR-3400-L-7"

MNPT Description Drill Dia. Work Length Model

1/2" 60 Deg Angle Tool 3/8" (9.5mm) 24"/60cm CKR-5200-L-24" ...Options

1/2" 60 Deg Angle Tool 3/8" (9.5mm) 18"/45cm CKR-5200-L-18"

specifications of components: pressure gauge, glycerine filled, constructed of 316 Stainless Steel, for restrictions refer to ASME B40.1. Fittings & connectors, constructed of 316 Stainless Stell conform to ANSI B36.10, ANSI B1.20.1, MIL-P-7105 B, barstock material ASME SA479. Manufactured to API 570, ASME B31.3. All components supplied conform to ANSI, ASME, ASTM and ISO-9002

A COKER BOSSTM cleaner allows resid, coke or hard materials to be removed from clogged bleed valves during normal operations. Parts for these Coker Bosstm cleaners can be replaced in the field, ending the need for factory maintenance.

Field Replacement Parts Kits

Parts kits end the need for most factory service. Simply remove the nut on the handle plus the tube fitting at the body and remove the internal parts for complete field replacement in seconds. Parts kits are fully assembled at the factory and include end tube fitting, body tube fitting, tube, cutter, our unique wire rope, wire rope/push rod connector, safety stop (blow-out preventer), threaded push rod and nut for the angle models. Parts kits for the straight models include cutter, safety stop (blow-out preventer), threaded push rod and nut. We recommend a parts kit be obtained for each tool. When Parts Kits are needed simply add PK to the beginning of a model number. For example a model 6150L-84 requires PK6150L-84 parts kit.

All Three designs of bleeder cleaners are shown below. Available to fit your female NPT process connections in 1/4", 1/2", 3/4", 1" MNPT's

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
65
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
2550
Clients
Flange Alignment
Link104
Link105
brasswedges

Angle 90 Bleeder Cleaners

Angle 60 Bleeder Cleaners

Straight Bleeder Cleaners

A rod out device is the only safe tool available to clean

clogged instrument taps, drain valves, manifolds and orifice taps. Available in diameters of from 1/8" up to 5/8" and in lengths from 7 inches to 72 inches with end connections from 1/4" NPT to 1" NPT. Never again use a dangerous contraption that has no pressure gauge or vent valve to rod out valves and taps. The standard rod out device is the type 1 unless otherwise selected below

Type 3, 0-14 pH, 1000 deg F / 535 C, PSI 1000 / 70 BAR (Graphoil)

For cleaners designed specifically for Fluid Catalytic Cracking Units and other hardened process materials see CAT BOSS™ cleaners